17502 Exposure Head HEAD: value out of range All Some value in the head is out of range. For a thermal head, if this error occurred during a stroke or scorr command, check that the head parameters swidth and soffset sum together to give a value of 240 or less. If not, either pixels need to be chopped or the stroke offset needs to be changed. Call service. Some value in the head firmware is out of range. This is could be an internal value, an NVS value, or a user-entered value. This error may occur during scorr or stroke commands, when the NVS parameters "head soffset" and "head swidth" sum together to give a value greater than 240. ../nvs/head_cal_soffset.xmlNVS: head soffset ../nvs/head_cal_swidth.xmlNVS: head swidth ../nvs/head_cal_soffsetn.xmlNVS: head soffsetn ../nvs/head_cal_swidthn.xmlNVS: head swidthn ../commands/stroke.xmlCommand: stroke ../commands/scorr.xmlCommand: scorr ..\..\ShowAllErrors.htmFirmware 0 Error Index ..\..\ShowAllCommands.htmFirmware 0 Command Index ..\..\ShowAllNVS.htmFirmware 0 NVS Index Updated: Wed Jul 16 19:33:36 2008 PST